HOME → Our Products → Sheets → Stainless Steel Products →Stainless Steel 316/316L Sheets Manufacturer
316 / 316L Sheets & Plates Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
316 / 316L Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
SS 316 / 316L Sheets & Plates Size Range | Cold rolled ASME SA240 Grade 316 / 316L Stainless Steel Sheet 0.5-6.4 mm Hot rolled ASME SA240 Grade 316 / 316L Stainless Steel Sheet 3.0–10.0 mm |
316 / 316L SS Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
SS 316 / 316L Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
SS 316 / 316L Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Stainless Steel 316 / 316L Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Stainless Steel 316 / 316L Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SA240 316 / 316L SS Strips EN 10088 SA -240-316 / 316L Strips |
Finish of SS 316 / 316L Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Stainless Steel 316 / 316L Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 316 | 0.08 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
SS 316L | 0.035 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.89 min |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
SS 316 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
SS 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Standard | Description |
ASTM A240M | Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and general applications. |
ASTM A263 | Corrosion resisting chromium steel clad plate, sheet and strip. |
ASTM A264 | Stainless chromium-nickel steel clad plate, sheet and strip. |
ASTM A666 | Austenitic stainless steel sheet, strip, plate and flat bar for structural applications. |
ASTM A693 | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
ASTM A480/A480M | General requirements for flat rolled stainless and heat resisting steel plate, sheet and strip. |
ASTM A793 | Specification for Rolled Floor Plate, Stainless Steel |
ASTM A895 | Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
EN 10088-2 | Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip for general purposes. |
AMS 5511 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.5Ni (316L), Solution Heat Treated |
AMS 5513 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.2Ni (SAE 30316), Solution Heat Treated |
AMS 5501 | Steel, Corrosion Resistant, Sheet, Strip, and Foil, 19Cr – 9.5Ni (316), Cold Rolled, 125 ksi (862 MPa) Tensile Strength |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Products | Size | |
ASTM A240 TP316 / 316L SS Perforated Sheet | ASTM A240 TP316 / 316L SS Plates | Sizes 3.0–10.0 mm |
ASTM A240 TP316 / 316L SS Sheet | ASTM A240 TP316 / 316L Stainless Steel Chequered Plate | |
ASTM A240 TP316 / 316L Stainless Coils | ASTM A240 TP316 / 316L SS Foils | |
ASTM A240 TP316 / 316L SS Shims | ASTM A240 TP316 / 316L SS Polished Plates | |
ASTM A240 TP316 / 316L Stainless Hot Rolled Plates | ASTM A240 TP316 / 316L Stainless Cold Rolled Plates | |
ASTM A240 TP316 / 316L SS Strips | ASTM A240 TP316 / 316L Stainless Roof Sheets | |
ASTM A240 TP316 / 316L Stainless Metal Sheet | ASTM A240 TP316 / 316L Stainless Polished Texture Sheet | |
ASTM A240 TP316 / 316L SS Cut to Size | ASTM A240 TP316 / 316L SS Circle | |
ASTM A240 TP316 / 316L SS Discs | ASTM A240 TP316 / 316L SS Blank |
Surface Finish | Definition | Application |
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
To keep it safe from the elements, each bundle is wrapped in plastic.
A plastic strip protects the end of a 316/316L stainless steel plate.
Plastic Strip protects the end of a 316/316L stainless steel plate.
A separator separates each radius of the U-Bend tube.
Placed with the box/crate is a laminated packaging list.