HOME → Our Products → Sheets → Stainless Steel Products → Stainless Steel 310/310S Sheets Manufacturer
310 / 310S Sheets & Plates Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
310 / 310S Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
SS 310 / 310S Sheets & Plates Size Range | Cold rolled ASME SA240 Grade 310 / 310S Stainless Steel Sheet 0.5-6.4 mm Hot rolled ASME SA240 Grade 310 / 310S Stainless Steel Sheet 3.0–10.0 mm |
310 / 310S SS Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
SS 310 / 310S Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
SS 310 / 310S Sheets & Plates Thickness | 0.3 mm to 120 mm |
International Standard of Stainless Steel 310 / 310S Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
Tolerances (width / thickness) of Stainless Steel 310 / 310S Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SA240 310 / 310S SS Strips EN 10088 SA -240-310 / 310S Strips |
Finish of SS 310 / 310S Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Stainless Steel 310 / 310S Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 | 40 % |
Standard | Description |
ASTM A240M | Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and general applications. |
ASTM A263 | Corrosion resisting chromium steel clad plate, sheet, and strip. |
ASTM A264 | Stainless chromium-nickel steel clad plate, sheet, and strip. |
ASTM A666 | Austenitic stainless steel sheet, strip, plate, and flat bar for structural applications. |
ASTM A693 | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
ASTM A480/A480M | General requirements for flat-rolled stainless and heat-resisting steel plate, sheet, and strip. |
ASTM A793 | Specification for Rolled Floor Plate, Stainless Steel |
ASTM A895 | Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
EN 10088-2 | Stainless plates of steel – Part 2: Technical delivery conditions for sheet/plate and strip for general purposes. |
AMS 5511 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.5Ni (310S), Solution Heat Treated |
AMS 5513 | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr – 9.2Ni (SAE 30310), Solution Heat Treated |
AMS 5501 | Steel, Corrosion Resistant, Sheet, Strip, and Foil, 19Cr – 9.5Ni (310), Cold Rolled, 125 KSI (862 MPa) Tensile Strength |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
Products | Size | |
ASTM A240 TP310 / 310S SS Perforated Sheet | ASTM A240 TP310 / 310S SS Plates | Sizes 3.0–10.0 mm |
ASTM A240 TP310 / 310S SS Sheet | ASTM A240 TP310 / 310S Stainless Steel Chequered Plate | |
ASTM A240 TP310 / 310S Stainless Coils | ASTM A240 TP310 / 310S SS Foils | |
ASTM A240 TP310 / 310S SS Shims | ASTM A240 TP310 / 310S SS Polished Plates | |
ASTM A240 TP310 / 310S Stainless Hot Rolled Plates | ASTM A240 TP310 / 310S Stainless Cold Rolled Plates | |
ASTM A240 TP310 / 310S SS Strips | ASTM A240 TP310 / 310S Stainless Roof Sheets | |
ASTM A240 TP310 / 310S Stainless Metal Sheet | ASTM A240 TP310 / 310S Stainless Polished Texture Sheet | |
ASTM A240 TP310 / 310S SS Cut to Size | ASTM A240 TP310 / 310S SS Circle | |
ASTM A240 TP310 / 310S SS Discs | ASTM A240 TP310 / 310S SS Blank |
Surface Finish | Definition | Application |
2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils. |
BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
NO.3 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction. |
NO.1 | The surface is finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe |
> Each bundle is covered with plastic for protection against extreme weather
> A plastic strip protects the end of a 310 / 310S stainless steel plate.
> A plastic strip protects the end of a 310/310S stainless steel plate.
> Each radius of the U-Bend tube is separated by a separator
> Packaging list (laminated) placed with box/crate
WhatsApp us